C&W supplied Rawhide Sand with a MCP-7500 dust collector, a canopy hood for the bucket elevator and a 3500 CFM air knife to clean dust oﬀ the return belt. This plant specializes in drying and classifying sand.
Rawhide Sand uses a MCP-7500 to collect dust from the bucket elevator and the conveyor under the classiﬁer.
All dust from the Classiﬁer drops onto the conveyor are controlled.
C&W 30” Long Air Knife cleans dust from the return belt, using 3500 CFM.
A solenoid stops air ﬂow to the Air Knife when the Conveyor is not in motion.
Air Knife Regulator is set to 60 PSIG.
C&W’s MCP-7500 features:
~ 7500 CFM with 15 HP blower
~ Oﬀers 1073 Sq. Ft of Filtration Area
~ Pulse Jet cleaning of cartridges with timer
~ Fifteen (15) 8” X 54” Cartridges
~ 99.99% ﬁltration eﬃciency
~Hopper discharge duct to empty collected dust onto return belt conveyor
~ Top Entry for clean-side ﬁlter exchange