Case Studies

C&W has vast experience with dust control solutions in various applications. We have extensive knowledge of the ready mix, food, and plastics industries. These case studies highlight just a few of the dust collection solutions we’ve provided for our customers.

 
 
 

Jobsite Report: Worthington Monuments Fort Worth, Texas

C&W supplied one MCP-5000 Central Collector with Easy-UP ducting for Worthington Monuments at their sand blasting operation:

C&W’s MCP-5000 Collector features:

~ 5000 CFM w/ 10HP Blower

~ Offers 714 Sq. Ft of Filtration Area

~ Pulse Jet cleaning of cartridges

~ Ten (10) 8” X 54” Cartridges

~ 99.99% filtration efficiency

Read more

Jobsite Report: RA-140 & Two LPR-8 Silo Collectors Vulcan Materials

C&W’s supplied Vulcan Material with an RA-140 offering:

  • 6500 CFM
  • 1433 sq. ft. of total filtration area
  • 10 HP motor
  • Optional 10 HP Auto Recycle System
  • Cambered cabinet wall design increases strength and helps prevent oil-canning

C&W also supplied:

Read more

Jobsite Report: Refurbishing Facility 20,000 CFM Cartridge Units

In July 2006, C&W supplied a local Sand Blasting Facility with 4 large units, two of which were 40,000 CFM and the other two being 20,000 CFM units.

Shown above are the 20,000 CFM Cartridge Pulse Collectors, sitting side by side.

 

Read more

Jobsite Report: MCP-7500 for Sand Drying & Classifying Cleburne, TX

C&W supplied Rawhide Sand with a MCP-7500 dust collector, a canopy hood for the bucket elevator and a 3500 CFM air knife to clean dust off the return belt. This plant specializes in drying and classifying sand.

 

Rawhide Sand uses a MCP-7500 to collect dust from the bucket elevator and the conveyor under the classifier.

All dust from the Classifier drops onto the conveyor are controlled.

Read more

Jobsite Report: Mayco Mix | Two CP-7500 Central Dust Collectors

Mayco Mix purchased the optional recycle system for both collectors to return collected material back to the silo of their choice.

C&W supplied two CP-7500’s for Mayco Mix, LTD in British Columbia, Canada.

C&W’s CP-7500 features:

~ 7500 CFM with 15 HP Blower

~ Offers 1651 sq. ft. of Filtration Area

~ Pulse Jet cleaning of cartridges with timer

Read more

Jobsite Report: Two (2) CP-34,000C for Sand Drying & Classifying

C&W was contracted by Industrial Sand to fabricate both dust collectors, design a custom duct layout which included 98 various dusting pick up points, and helped with the plant start up to balance the system.

Each pick up point requires 4,000 ft/min velocity, and adjustable slide gates were used to achieve this velocity throughout the plant.

 

Read more

Jobsite Report: Two (2) CP-70,000 Dust Collectors for Sand Blasting Booth

C&W supplied two (2) CP-70,000 Dust Collectors for High Concrete’s silica sand blasting operation.

Each CP-70,000 features:

~ 14,476 Sq. Ft of Filtration Area

~ Each collector has two 55 gallon barrel drops to collect dust for easy disposal

~ 70,000 CFM with 150 HP Fan @ 8” W.C.

~ 99.9% filtration efficiency

Read more

Jobsite Report: Hanson Brick

Two C&W Dust Collection Systems for a Mixer Drum with De-bagger and a Brick Coloring Station\

At each ducting pick-up point, C&W supplied an aluminum slide gate to balance air flow.

 

C&W Supplied the Snorkel Box

C&W Supplied Hanson Brick’s Mixer Drum and De-Bagger with:

Read more

Jobsite Report: Double Slump Master

C&W supplied one Double Slump Master G3 for Manatt’s in Iowa.

C&W’s Double Slump Master features:

~ Lightweight Decking and Stairs

~ Safe way to check Slump; OSHA compliant

~ Heavy-Duty Galvanized Steel Construction

~ Hands-free Operation of Pivot Deck

~ Ships in a wooden crate via motor-freight

Read more

Jobsite Report: CP-7500’s for Martin Marietta

C&W supplied two CP-7500’s for Martin Marietta (previously TXI) in Texas.

C&W’s CP-7500 features:

~ 7500 CFM with 15 HP Blower

~ Offers 1651 sq. ft. of Filtration Area

~ Pulse Jet cleaning of cartridges with timer

~ Sixteen (16) 8” X 78” Cartridges

~ 99.99% filtration efficiency

Read more

ABOUT

C&W Manufacturing & Sales, Co.™ manufactures equipment to clean up dust, mist and fume from manufacturing processes.

LATEST NEWS

No news right now. Check back soon.

GET IN TOUCH:

P.O. Box 908  |  Crowley, TX 76036
6933 Shelmor Rd  |  Alvarado, TX 76009
800-880-DUST (3878)  |  817-783-5000